File(s) under embargo
until file(s) become available
Supporting data for "Behaviour and Design of Cold-Formed Steel Built-up Section Structural Members"
datasetposted on 06.07.2021, 06:47 authored by Qiuyun LiQiuyun Li, Ben Young
The objective of this research is to investigate the behaviour of cold-formed steel built-up section structural members. A series of four-point bending tests, pin-ended column tests, eccentric compression tests and non-uniform bending beam-column tests were conducted to obtain the experimental data. In addition, the extensive parametric studies using the finite element models validated against the test results were performed to generated additional numerical data.